- 專業生產巖板、石材、玻璃機械與之配套的各種工具耗材設備技術優良，人性化操作設計
customer
service hotline 18995984321
service hotline 18995984321
How much is the circular arc small rock cutting machine? What if the cutting machine breaks? Is there any good solution? |
| 發布：2022/3/2 來源： 作者： 瀏覽：962次 |
| Many times, no matter in production or life, we will encounter all kinds of problems. Then, what if the cutting machine collapses? Today, let's talk about this topic, and then talk about the solution. How much is the circular arc small rock cutting machine? What if the cutting machine breaks? Is there any good solution? In general, during water jet cutting, the places where edge collapse may occur mainly include: the edge of the original film may have edge collapse, and the four edges of the original film may have beveled edges, affecting the diagonal of the product. We can do a good job from the following five aspects: reduce the angle of water jet cutting head; Water jet knife sand with uniform particles shall be used, and there shall be no large particles, because the cutting edge of large particles is rough. However, there should not be too fine particles, because the cutting efficiency is slow; When breaking the edge, the force should be downward and outward at the same time (relative to the knife mark); Correctly obtain the accurate size of product introduction read by the equipment; When breaking the film, first open the crack, and then divide the part into small pieces with a hand knife, and then break it gradually. Don't try to remove the complete leftover material, which is of little use. The above is about how much is the circular arc small rock plate cutting machine? What if the cutting machine breaks? Is there any good solution, If you don't understand these contents, please feel free to come to us at any time. |
| 【字體：大 中 小】 【關閉窗口】 |
| Disclaimer: if the content is similar or infringed, please notify us in time and thank you for your support |
| 上一篇：How to maintain the rock cutting machine? Is there any correct maintenance method? 下一篇：How about rock board water cutting machinery manufacturers in rural areas? What factor… |
TIME: 2022/2/22 15:00:054
TIME: 2022/2/22 14:53:104
TIME: 2022/2/22 14:50:104
TIME: 2022/2/22 14:43:104
TIME: 2022/2/22 14:38:454
TIME: 2022/2/22 14:35:514
鄂公網安備 42900402000365號
鄂ICP備2022002751號-1
首頁
電話
短信